13639 Crenshaw Boulevard Hawthorne, CA 90250		Tel 310/970-0084 Fax 310/970-0205

Directions
When using this compound for the first time (or after an extended shutdown), on steel media in vibratory or tumbling equipment, rinse the media thoroughly to remove all traces of previously used compound. Following this rinse procedure, add compound to (per mix directions below) and run in the media (no parts) for 15 to 20 minutes. Rinse again. The equipment and steel media will then be ready for top-notch performance.
For flow-through systems, use 1 or 2 ounces of product per gallon of water. Set the flow rate to deliver 1 gallon of end use solution per hour for each cubic foot of vibrating container capacity. Adjust as necessary.
For Example, for a 3 cubic foot machine, meter the end use solution at a rate of 3 gallons per hour.
For Manual Addition (e.g. batch runs), add 1 or 2 ounces of product for each cubic foot of vibrating container capacity. Consult your RICHWOOD representative for more specific use applications, or e-mail a technician at Tech@RichwoodIndustries.com.

Safety
Keep out of Reach of Children! Contains synthetic detergents and 2-Butoxyethanol (Butyl Cellosolve). Harmful if ingested or absorbed through the skin. Wear suitable protective gloves and clothing and use adequate ventilation to prevent exposure. Eye and skin irritation hazard. Before using this product, please read the MSDS sheet and consult with a RICHWOOD representative or e-mail a technician at Tech@RichwoodIndustries.com for proper use and application directions
In case of ingestion: Drink 1 or 2 glasses of water or milk. DO NOT INDUCE VOMITING! Get immediate medical advice.
In case of eye contact: Flush eyes with running water for 15 minutes. Flush the areas behind the eyelids completely. Seek immediate medical attention.
In case of skin contact: Flush the exposed areas with large amounts of running water. Seek medical attention if irritation develops.